Category: fujikawa

Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS

Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS

Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
I offer discounts for multiple items: 10% for 2, 15% for 3, and 20% off for 4 or more. The discount will be automatically applied when you add the items to the cart. I have a large collection of Japanese chisels, so if you don’t see what you’re looking for in my store, please send me a message and I will check my inventory. Nezumi is Fujikawa’s high end line of chisels. This is made with a special, high-performance powdered metal high-speed steel. High-speed steel provides a sharp edge that is very difficult to dull or chip, making it a great choice for hard, abrasive, or dirty woods, as well as other materials like MDF, various plastics, etc. The handle on this one is angled more than normal so you don’t hit it when chopping deep mortises, I think it’s a special order item. Condition: The chisel is in good used condition. The back has been flattened and it has been sharpened to 8000 grit on Shapton Glass stones. The hoop has been set and the handle mushroomed. Save yourself the considerable setup time with this used and ready to use chisel. The style is Oire Nomi, otherwise known as a standard bench chisel. This style of chisel is meant for general-purpose use and is suitable for carpentry and cabinetry work. With a metal hoop to prevent splitting of the wood handle, it is meant to be hit with a genno or metal hammer. Width: 30mm 1 1/8. Length: 215mm 8 1/2. ?? – Nezumi from Fujikawa. Style: Oire Nomi (bench chisel). Handle Wood: Gumi wood. Hoop Style: Hammer finish.
Fujikawa Nezumi? 30mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS

Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS

Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS

Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS
I offer discounts for multiple items: 10% for 2, 15% for 3, and 20% off for 4 or more. The discount will be automatically applied when you add the items to the cart. I have a large collection of Japanese chisels, so if you don’t see what you’re looking for in my store, please send me a message and I will check my inventory. Nezumi is Fujikawa’s high end line of chisels. This is made with a special, high-performance powdered metal high-speed steel. High-speed steel provides a sharp edge that is very difficult to dull or chip, making it a great choice for hard, abrasive, or dirty woods, as well as other materials like MDF, various plastics, etc. Condition: The chisel is in good used condition. The back has been flattened and it has been sharpened to 8000 grit on Shapton Glass stones. The hoop has been set and the handle mushroomed. Save yourself the considerable setup time with this used and ready to use chisel. The style is Oire Nomi, otherwise known as a standard bench chisel. This style of chisel is meant for general-purpose use and is suitable for carpentry and cabinetry work. With a metal hoop to prevent splitting of the wood handle, it is meant to be hit with a genno or metal hammer. Width: 36mm 1 3/8. Length: 215mm 8 1/2. ?? – Nezumi from Fujikawa. Style: Oire Nomi (bench chisel). Handle Wood: Gumi wood. Hoop Style: Hammer finish.
Fujikawa Nezumi? 36mm 215mm Japanese Bench Chisel Oire Nomi Powdered HSS

Fujikawa Professional Oire Nomi Japanese Chisel Set of 5

Fujikawa Professional Oire Nomi Japanese Chisel Set of 5
Fujikawa Professional Oire Nomi Japanese Chisel Set of 5
Fujikawa Professional Oire Nomi Japanese Chisel Set of 5

Fujikawa Professional Oire Nomi Japanese Chisel Set of 5
Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 to make the hagane layer that forms the back and the cutting edge. There are three main grades of white steel, No1 having the highest carbon content, and a myriad of sub grades within each. It took 10 years of experimentation to find the perfect grade, but they can now produce blades which have similar hardness and edge retention to blue, but retain the higher fracture resistance of white. Mr Fujikawa insists on absolutely traditional methods. His smiths work in a darkened blacksmithing shop so that they can see the colour of the steel they are working, and use coke forges to minimise carbon loss as the steel is heated. Quenching is done in water as this provides the fast quench needed for highly pure steels. The soft water in Miki city is particularly well suited to the job. The blades are cooled in straw ash to retain as much carbon as possible as the steel structure changes after the quench. After hand grinding, the blades are fitted with premium grade red oak handles and deeply hot blued hoops. The manufacturers recommend honing a single flat bevel, following the optimal 34 degree angle that the tools are ground to when supplied. This set includes 6, 9, 12, 18 and 24mm chisels and is supplied with a Workshop Heaven 6 pocket canvas tool roll. Material: Selected White Paper Steel No. 1 C 1.4%, Si 0.1%, Mn 0.2%, Ph 0.025% or less, S 0.004% or less. Handle Material: Hon Akagashi (premium Japanese Red Oak). The item “Fujikawa Professional Oire Nomi Japanese Chisel Set of 5″ is in sale since Wednesday, January 6, 2021. This item is in the category “Collectables\Tools & Collectable Hardware\Collectable Tools\Carpentry & Woodworking Tools\Chisels & Gouges”. The seller is “workshop-heaven” and is located in Banbury. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Type: Chisels
  • Manufacturer: Fujikawa
  • Country/Region of Manufacture: Japan

Fujikawa Professional Oire Nomi Japanese Chisel Set of 5

Fujikawa Professional Oire Nomi Japanese Chisels Box Set of 10

Fujikawa Professional Oire Nomi Japanese Chisels Box Set of 10
Fujikawa Professional Oire Nomi Japanese Chisels Box Set of 10
Fujikawa Professional Oire Nomi Japanese Chisels Box Set of 10

Fujikawa Professional Oire Nomi Japanese Chisels Box Set of 10
Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 to make the hagane layer that forms the back and the cutting edge. There are three main grades of white steel, No1 having the highest carbon content, and a myriad of sub grades within each. It took 10 years of experimentation to find the perfect grade, but they can now produce blades which have similar hardness and edge retention to blue, but retain the higher fracture resistance of white. Mr Fujikawa insists on absolutely traditional methods. His smiths work in a darkened blacksmithing shop so that they can see the colour of the steel they are working, and use coke forges to minimise carbon loss as the steel is heated. Quenching is done in water as this provides the fast quench needed for highly pure steels. The soft water in Miki city is particularly well suited to the job. The blades are cooled in straw ash to retain as much carbon as possible as the steel structure changes after the quench. After hand grinding, the blades are fitted with premium grade red oak handles and deeply hot blued hoops. The manufacturers recommend honing a single flat bevel, following the optimal 34 degree angle that the tools are ground to when supplied. The full set of 10 is presented in a fitted box made from lightweight kiri (paulownia) wood. Kiri is a lightweight, very stable, sustainable timber with excellent natural humidity regulating and anti-corrosive properties. Material: Selected White Paper Steel No. 1 C 1.4%, Si 0.1%, Mn 0.2%, Ph 0.025% or less, S 0.004% or less. Handle Material: Hon Akagashi (premium Japanese Red Oak). The set of 10 includes 3, 6, 9, 12, 15, 18, 24, 30, 36 and 42mm chisels. The item “Fujikawa Professional Oire Nomi Japanese Chisels Box Set of 10″ is in sale since Monday, November 12, 2018. This item is in the category “Collectables\Tools & Collectable Hardware\Collectable Tools\Carpentry & Woodworking Tools\Chisels & Gouges”. The seller is “workshop-heaven” and is located in Banbury. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Country/Region of Manufacture: Japan
  • Manufacturer: Fujikawa
  • Type: Chisels

Fujikawa Professional Oire Nomi Japanese Chisels Box Set of 10