Tag: chisel

Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru

Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru
Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru
Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru
Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru
Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru
Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru
Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru
Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru
Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru
Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru
Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru
Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru

Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru
Blade 3mm, 6mm, 9mm, 12mm, 15mm, 18mm, 24mm, 30mm, 36mm, 42mm. This chisel is made in Sanjo City, Niigata. The characteristic of this chisel is that it is made of White steel #2 (shirogami2gou). The chisel was made by Nagaoka Kazuyoshi, a blacksmith from Sanjo, Niigata Prefecture. His job was to seek the sharpness and sharpness of the chisel by suppressing the disharmony between steel and soft iron. It is made by special low temperature forging only in his workshop. It is a very high quality chisel with his unique technique. The joint between the handle and the chisel is beautifully finished, and is evaluated for its durability and sharp sharpness. We can’t get many sets, but we will sell them at a special price. List of other our shop recommended chisel sets. Tachibana Toshiaki oire nomi HSS Set of 10. Sukemaru oire nomi HSS Set of 10. Musou-ken oire nomi White Steel #2 Set of 10. Yashushi Hanyu Shinogi nomi 3-9mm White Steel#2 12-42mm Blue Steel #2. Tachibana Toshiaki oire nomi HSS Set of 5. Yasushi Hanyu oire nomi Mokume finish Rose wood handle Set of 10. Akio Tasai oire nomi “Shin-do” Special Blue Seel Set of 10. Nakano Shigeru Uchi – maru nomi White Steel #2 Set of 10. Yasushi Hanyu oire nomi Mokume finish White oak handle Set of 10. Wood Carving Chisel Akatsuki. Set of 10 Made by Kiyogen. Akio Tasai Oire nomi “Fu-setsu” White Steel#2. Yasushi Hanyu Oire nomi Mokume finish Red oak handle Set of 10. We will send you a new invoice and offer a discount. International Buyers – Please Note. ·We do not mark merchandise values below value or mark items as gifts US and International government regulations prohibit such behavior. Please see our other items. Please find a best item in. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Carpentry, Woodworking\Chisels”. The seller is “bankane-japan-carpenters-shop” and is located in this country: JP. This item can be shipped worldwide.
  • Brand: Kikuhiromaru
  • Original/Reproduction: Contemporary Original
  • Featured Refinements: Japanese Chisel
  • Country/Region of Manufacture: Japan
  • Modified Item: No
  • Modification Description: None

Japanese chisel Oire nomi Set of 10 3mm~42mm Kikuhiromaru

Japanese quality chisel Oire Tataki Nomi Lot of 10 Carpenter tools #6619

Japanese quality chisel Oire Tataki Nomi Lot of 10 Carpenter tools #6619
Japanese quality chisel Oire Tataki Nomi Lot of 10 Carpenter tools #6619
Japanese quality chisel Oire Tataki Nomi Lot of 10 Carpenter tools #6619
Japanese quality chisel Oire Tataki Nomi Lot of 10 Carpenter tools #6619
Japanese quality chisel Oire Tataki Nomi Lot of 10 Carpenter tools #6619
Japanese quality chisel Oire Tataki Nomi Lot of 10 Carpenter tools #6619
Japanese quality chisel Oire Tataki Nomi Lot of 10 Carpenter tools #6619

Japanese quality chisel Oire Tataki Nomi Lot of 10 Carpenter tools #6619
Please also see the information below? Sharpening Stone list page. 2-33F6619 Condition: Very Good Brand: Unknown Item: Plane Type: Tatakinomi, Oirenomi, etc Blade width: – Length: – Feature: A tool that cleans the surface when making furniture and fixtures. You can continue to use it if you take care of it. Note: There are broken blades and rust. Polish with a whetstone if necessary. Thank you for your understanding. About Us Question in Japanese. I offer courteous and prompt service. Thank you very much. Please translate in your language Do not copy, duplicate or reproduce the article or photo. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Carpentry, Woodworking\Chisels”. The seller is “nup4989ten” and is located in this country: JP. This item can be shipped to North, South, or Latin America, all countries in continental Asia, United Kingdom, France.
  • Brand: Unknown
  • MPN: Plane
  • Type: Tatakinomi, Oirenomi, etc
  • Material: Japan
  • Country/Region of Manufacture: Japan
  • Modified Item: No
  • Original/Reproduction: Original
  • Country of shipment: Japan

Japanese quality chisel Oire Tataki Nomi Lot of 10 Carpenter tools #6619

Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm

Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm
Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm
Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm
Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm
Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm
Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm
Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm
Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm
Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm
Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm
Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm
Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm

Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm
Features / Remarks Unused item Set contents: 12/15/24/30/36 / 42mm. Condition details are listed in the Condition section. All items pictured are complete. Please check condition and photos carefully. Also, please feel free to ask any questions you may have. If that, please let us know within 3 days you got the item. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Carpentry, Woodworking\Chisels”. The seller is “yuiyam-27″ and is located in this country: JP. This item can be shipped worldwide.
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Modification Description: None
  • Brand: Chouke Kikkoumaru
  • Original/Reproduction: Unknown

Japanese chisel Oire nomi Set of 6 Unused Set contents 12/15/24/30/36/42 mm

Kikuhiromaru oire nomi Japanese Chisel 9mm

Kikuhiromaru oire nomi Japanese Chisel 9mm
Kikuhiromaru oire nomi Japanese Chisel 9mm
Kikuhiromaru oire nomi Japanese Chisel 9mm
Kikuhiromaru oire nomi Japanese Chisel 9mm
Kikuhiromaru oire nomi Japanese Chisel 9mm
Kikuhiromaru oire nomi Japanese Chisel 9mm

Kikuhiromaru oire nomi Japanese Chisel 9mm
Brand new never sharpened or used. Measures 8.65mm wide. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Carpentry, Woodworking\Chisels”. The seller is “2planksjon” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Kikuhiromaru
  • Country/Region of Manufacture: Japan

Kikuhiromaru oire nomi Japanese Chisel 9mm

Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2

Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2
Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2
Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2
Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2
Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2
Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2
Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2
Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2
Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2
Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2
Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2
Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2

Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2
Blade 3mm, 6mm, 9mm, 12mm, 15mm, 18mm, 24mm, 30mm, 36mm, 42mm. This chisel is made in Sanjo City, Niigata. This chisel set “Musou-ken” is manufactured by a cutting tool company in Niigata. This chisel is handmade by a blacksmith in that company. This is a low ranking item compared to famous craftsmen such as Tasai, Hanyu, Oouchi, and Kiyoei, but you can get it at a very reasonable price. The material is also white steel # 2. For people who use a Japanese chisel for the first time, it is an item at the level that they can realize how good a Japanese chisel is. List of other our shop recommended chisel sets. Tachibana Toshiaki oire nomi HSS Set of 10. Sukemaru oire nomi HSS Set of 10. Kikuhiromaru oire oirenomi White Steel #2 Set of 10. Yashushi Hanyu Shinogi nomi 3-9mm White Steel#2 12-42mm Blue Steel #2. Tachibana Toshiaki oire nomi HSS Set of 5. Yasushi Hanyu oire nomi Mokume finish Rose wood handle Set of 10. Akio Tasai oire nomi “Shin-do” Special Blue Seel Set of 10. Nakano Shigeru Uchi – maru nomi White Steel #2 Set of 10. Yasushi Hanyu oire nomi Mokume finish White oak handle Set of 10. Wood Carving Chisel Akatsuki. Set of 10 Made by Kiyogen. Akio Tasai Oire nomi “Fu-setsu” White Steel#2. Yasushi Hanyu Oire nomi Mokume finish Red oak handle Set of 10. We will send you a new invoice and offer a discount. International Buyers – Please Note. ·We do not mark merchandise values below value or mark items as gifts US and International government regulations prohibit such behavior. Please see our other items. Please find a best item in. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Carpentry, Woodworking\Chisels”. The seller is “bankane-japan-carpenters-shop” and is located in this country: JP. This item can be shipped worldwide.
  • Brand: Musou-ken
  • Modification Description: None
  • Original/Reproduction: Contemporary Original
  • Featured Refinements: Japanese Chisel
  • Country/Region of Manufacture: Japan
  • Modified Item: No

Japanese chisel Oire nomi bench chisel Musou-ken Set of 10 White Steel #2

Japanese Nomi Nagahiro Craftsman Chisel Gumi 35mm Carpenter Sharpness 6mm J7076

Japanese Nomi Nagahiro Craftsman Chisel Gumi 35mm Carpenter Sharpness 6mm J7076
Japanese Nomi Nagahiro Craftsman Chisel Gumi 35mm Carpenter Sharpness 6mm J7076
Japanese Nomi Nagahiro Craftsman Chisel Gumi 35mm Carpenter Sharpness 6mm J7076
Japanese Nomi Nagahiro Craftsman Chisel Gumi 35mm Carpenter Sharpness 6mm J7076
Japanese Nomi Nagahiro Craftsman Chisel Gumi 35mm Carpenter Sharpness 6mm J7076

Japanese Nomi Nagahiro Craftsman Chisel Gumi 35mm Carpenter Sharpness 6mm J7076
Japanese Nomi Nagahiro Craftsman Chisel Gumi 35mm Carpenter Sharpness 6mm J7076. Condition of Item: Pre-Owned Rank: B. Blade width: 35, 29, 24, 12, 6 mm. Full length: 189, 166, 162, 188, 202 mm. Comes with two handle of Japanese Gumi. It is used but used only a few times and there are no scratches and dirt. No noticeable scratches or stains. There are some scratches and dirt that you do not know unless you look closely. There are some scratches and dirt. There are some scratches and dirt that are known to be used. There are scratches and dirt. There is a big scratch and dirt of the level understood at a glance. Overall condition is bad. There is a defect at the level that big troubles and dirt and trouble in use. Please pay within 3 days. International Buyers – Special Attention. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Listing and template services provided by inkFrog. This item is in the category “Home & Garden\Tools & Workshop Equipment\Hand Tools\Chisels”. The seller is “diy_carpenter_japan” and is located in this country: JP. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Nagahiro
  • Type: Oire Nomi
  • Handle Material: Hardwood
  • Blade Material: High Carbon Steel
  • Number of Pieces: 7
  • Blade Width: 35, 29, 24, 12, 6 mm
  • Model: None
  • Manufacturer Warranty: None
  • Color: Black
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Bundle Description: None
  • Item Width: None
  • Item Length: None
  • Item Height: None
  • Item Diameter: None
  • Item Weight: None
  • None: None

Japanese Nomi Nagahiro Craftsman Chisel Gumi 35mm Carpenter Sharpness 6mm J7076

Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073

Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073
Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073
Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073
Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073
Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073
Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073
Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073
Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073
Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073
Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073

Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073
Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073. Condition of Item: Pre-Owned Rank: B. Brand: Yoshimitsu, Sadashige, Yuemah, etc. Needs sharpening and adjusting. It is used but used only a few times and there are no scratches and dirt. No noticeable scratches or stains. There are some scratches and dirt that you do not know unless you look closely. There are some scratches and dirt. There are some scratches and dirt that are known to be used. There are scratches and dirt. There is a big scratch and dirt of the level understood at a glance. Overall condition is bad. There is a defect at the level that big troubles and dirt and trouble in use. Please pay within 3 days. International Buyers – Special Attention. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Listing and template services provided by inkFrog. This item is in the category “Home & Garden\Tools & Workshop Equipment\Hand Tools\Chisels”. The seller is “diy_carpenter_japan” and is located in this country: JP. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Yoshimitsu, etc.
  • Type: Oire Nomi
  • Handle Material: Hardwood
  • Blade Material: Steel
  • Number of Pieces: 10
  • Blade Width: None
  • Model: None
  • Manufacturer Warranty: None
  • Color: Black
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Bundle Description: None
  • Item Width: None
  • Item Length: None
  • Item Height: None
  • Item Diameter: None
  • Item Weight: None
  • None: None

Japanese Chisel Sadashige Carpenter Yoshimitsu Vintage Yuemah Nomi Oire FS J7073

Japanese Nomi Onishi Sharpness Carpenter Craftsman Chisel Traditional Tool J7231

Japanese Nomi Onishi Sharpness Carpenter Craftsman Chisel Traditional Tool J7231
Japanese Nomi Onishi Sharpness Carpenter Craftsman Chisel Traditional Tool J7231
Japanese Nomi Onishi Sharpness Carpenter Craftsman Chisel Traditional Tool J7231
Japanese Nomi Onishi Sharpness Carpenter Craftsman Chisel Traditional Tool J7231
Japanese Nomi Onishi Sharpness Carpenter Craftsman Chisel Traditional Tool J7231
Japanese Nomi Onishi Sharpness Carpenter Craftsman Chisel Traditional Tool J7231
Japanese Nomi Onishi Sharpness Carpenter Craftsman Chisel Traditional Tool J7231
Japanese Nomi Onishi Sharpness Carpenter Craftsman Chisel Traditional Tool J7231

Japanese Nomi Onishi Sharpness Carpenter Craftsman Chisel Traditional Tool J7231
Japanese Nomi Onishi Sharpness Carpenter Craftsman Chisel Traditional Tool J7231. Blade width: 3, 6, 9, 12, 15, 18, 24, 30, 36, 42 mm. Box size: 336 x 245 x 31 mm. Please pay within 3 days. International Buyers – Special Attention. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Listing and template services provided by inkFrog. This item is in the category “Home & Garden\Tools & Workshop Equipment\Hand Tools\Chisels”. The seller is “diy_carpenter_japan” and is located in this country: JP. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Onishi
  • Type: Oire Nomi
  • Handle Material: Hardwood
  • Blade Material: Steel
  • Number of Pieces: 10
  • Blade Width: 3, 6, 9, 12, 15, 18, 24, 30, 36, 42 mm
  • Model: None
  • Manufacturer Warranty: None
  • Color: Black
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Bundle Description: None
  • Item Width: 336 mm
  • Item Length: 245 mm
  • Item Height: 31 mm
  • Item Diameter: None
  • Item Weight: None
  • None: None

Japanese Nomi Onishi Sharpness Carpenter Craftsman Chisel Traditional Tool J7231

Japanese Nomi Kitsune Vintage Isono Carpenter Banshu Miki Chisel 18mm Tool J7217

Japanese Nomi Kitsune Vintage Isono Carpenter Banshu Miki Chisel 18mm Tool J7217
Japanese Nomi Kitsune Vintage Isono Carpenter Banshu Miki Chisel 18mm Tool J7217
Japanese Nomi Kitsune Vintage Isono Carpenter Banshu Miki Chisel 18mm Tool J7217
Japanese Nomi Kitsune Vintage Isono Carpenter Banshu Miki Chisel 18mm Tool J7217
Japanese Nomi Kitsune Vintage Isono Carpenter Banshu Miki Chisel 18mm Tool J7217

Japanese Nomi Kitsune Vintage Isono Carpenter Banshu Miki Chisel 18mm Tool J7217
Japanese Nomi Kitsune Vintage Isono Carpenter Banshu Miki Chisel 18mm Tool J7217. Made in Banshu Miki. Blade width: 18 mm. Handle material: White oak. Please pay within 3 days. International Buyers – Special Attention. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Listing and template services provided by inkFrog. This item is in the category “Home & Garden\Tools & Workshop Equipment\Hand Tools\Chisels”. The seller is “diy_carpenter_japan” and is located in this country: JP. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Kitsune
  • Type: Oire Nomi
  • Handle Material: Hardwood
  • Blade Material: High Carbon Steel
  • Number of Pieces: 1
  • Blade Width: 18 mm
  • Model: None
  • Manufacturer Warranty: None
  • Color: Black
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Bundle Description: None
  • Item Width: None
  • Item Length: None
  • Item Height: None
  • Item Diameter: None
  • Item Weight: None
  • None: None

Japanese Nomi Kitsune Vintage Isono Carpenter Banshu Miki Chisel 18mm Tool J7217

Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148

Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148
Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148
Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148
Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148
Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148
Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148
Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148
Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148
Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148
Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148

Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148
Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148. Condition of Item: Pre-Owned Rank: C. Brand: Onikichi, Nobutada, Minamoto Nobuhiro, Tadatsugu, Nobumitsu, Tokuhiro, Hidari Yorimitsu, Minamoto Nobusada. Blade width: 9, 12, 15, 24, 24, 24, 36, 42 mm. Needs sharpening and adjusting. It is used but used only a few times and there are no scratches and dirt. No noticeable scratches or stains. There are some scratches and dirt that you do not know unless you look closely. There are some scratches and dirt. There are some scratches and dirt that are known to be used. There are scratches and dirt. There is a big scratch and dirt of the level understood at a glance. Overall condition is bad. There is a defect at the level that big troubles and dirt and trouble in use. Please pay within 3 days. International Buyers – Special Attention. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Listing and template services provided by inkFrog. This item is in the category “Home & Garden\Tools & Workshop Equipment\Hand Tools\Chisels”. The seller is “diy_carpenter_japan” and is located in this country: JP. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Onikichi, etc.
  • Type: Oire Nomi
  • Handle Material: Wood
  • Blade Material: Steel
  • Number of Pieces: 8
  • Blade Width: 9, 12, 15, 24, 36, 42 mm
  • Model: None
  • Manufacturer Warranty: None
  • Color: Black
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Bundle Description: None
  • Item Width: None
  • Item Length: None
  • Item Height: None
  • Item Diameter: None
  • Item Weight: None
  • None: None

Japanese Nomi Onikichi Vintage Nobutada Chisel Tadatsugu Carpenter Oire FS J7148