https://oirenomijapanese.com Sat, 06 Jun 2026 18:01:42 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://oirenomijapanese.com/2026/06/03/lot-of-10-vintage-japanese-chisels-oire-nomi-masakane-iwasaki-woodworking-tools/ https://oirenomijapanese.com/2026/06/03/lot-of-10-vintage-japanese-chisels-oire-nomi-masakane-iwasaki-woodworking-tools/#comments Wed, 03 Jun 2026 17:55:40 +0000 https://oirenomijapanese.com/2026/06/03/lot-of-10-vintage-japanese-chisels-oire-nomi-masakane-iwasaki-woodworking-tools/








Lot of 10 Vintage Japanese Chisels Oire Nomi Masakane Iwasaki Woodworking Tools. Up for sale is an exceptional, high-grade mega lot of 10 authentic Vintage Japanese Woodworking Chisels (Oire Nomi & Specialized Chisel Pack). Hand-forged in Japan using traditional laminated steel techniques (uniting hard high-carbon steel with a shock-absorbing iron backing), these chisels are coveted worldwide for their razor-sharp edge retention and historical craftsmanship. This ultimate variety lot contains highly acclaimed blacksmith names and stamps, including legendary makers such as Iwasaki , Masakane , Sukemasa , Mitsukuni , Sekiryu , and Hirosada. Featuring a fantastic mix of standard bench chisels, a deep slot/mortise chisel, and a curved gouge/paring profile, this 10-piece artisan set offers an instant upgrade to any workshop or an incredible addition to a premium vintage tool collection. Functional Status : Tested & Fully Operational. All chisels are structurally sound, with strong sockets and tight hoops (katsura) at the butt ends. The steel cutting edges are completely functional and ready for standard practical deployment. As is typical with authentic vintage hand tools, you can easily hone, flat-lap, or re-bevel the factory tips to match your precise micro-bevel angles and preferences. Cosmetic Status : Pre-owned Vintage Condition with Honest Workshop Character. These tools have proudly served Japanese craftsmen. The steel blades, sockets, and oak handles exhibit natural age patina, light surface oxidation/blacksmith scale marks, and cosmetic scratches from historical shop use, as displayed in the photos. Inscriptions Note : A breakdown of the makers based on the stamped kanji inscriptions is provided below. Because some characters are aged and heavily patinated, minor transcription variances may exist. Please carefully check the close-up photos to confirm and inspect the exact stamps for yourself. Lot Breakdown & Famous Makers Included. Masakane – 2 Pieces. Sukemasa – 2 Pieces. Iwasaki – 1 Piece (Highly renowned premium master blacksmith brand). Mitsukuni – 1 Piece. Sekiryu – 1 Piece. Hirosada – 1 Piece. Unknown / Maker Stamp Unreadable – 2 Pieces. Total Count: 10 Pieces (Everything shown in the photos is included). We do not mark merchandise values below value or mark items as gifts. Japan, US and International government regulations prohibit such behavior. About Importer’s Obligation. Thank you for your understanding.

]]> https://oirenomijapanese.com/2026/06/03/lot-of-10-vintage-japanese-chisels-oire-nomi-masakane-iwasaki-woodworking-tools/feed/ 0 https://oirenomijapanese.com/2026/02/08/vintage-kiichir-chisel-set-10-piece-oire-nomi-showa-era-japanesechisels-woodworkingtools/ https://oirenomijapanese.com/2026/02/08/vintage-kiichir-chisel-set-10-piece-oire-nomi-showa-era-japanesechisels-woodworkingtools/#comments Mon, 09 Feb 2026 01:56:33 +0000 https://oirenomijapanese.com/2026/02/08/vintage-kiichir-chisel-set-10-piece-oire-nomi-showa-era-japanesechisels-woodworkingtools/ ]]> https://oirenomijapanese.com/2026/02/08/vintage-kiichir-chisel-set-10-piece-oire-nomi-showa-era-japanesechisels-woodworkingtools/feed/ 0 https://oirenomijapanese.com/2025/10/07/vintage-japanese-nomi-chisel-set-15pcs-carpenter-tools-mixed-brands-non-us-buyer/ https://oirenomijapanese.com/2025/10/07/vintage-japanese-nomi-chisel-set-15pcs-carpenter-tools-mixed-brands-non-us-buyer/#comments Tue, 07 Oct 2025 08:26:51 +0000 https://oirenomijapanese.com/2025/10/07/vintage-japanese-nomi-chisel-set-15pcs-carpenter-tools-mixed-brands-non-us-buyer/








Important Notice (Non-US Buyers). This is a vintage Japanese carpenter tool set, including approximately 15 pieces such as chisels, carving knives, and woodworking tools. The set features several makers including Hidenobu , Kiyofusa , Naohide , Masamitsu , and Yoshimitsu. These tools were used by traditional Japanese craftsmen and are ideal for collectors, restorers, or those seeking authentic hand tools from Japan. Some signs of aging, rust, or wear due to storage and use. 15 mixed tools chisels, carving tools, gimlets, etc. Material: Carbon steel / Wooden handles. Type: Japanese Carpenter Tools Set. Each piece has unique character and patina. Perfect for woodworkers, collectors, or tool enthusiasts. Feel free to message us if you have any specific questions – we’re happy to help! More Japanese items? Authentic item from Japan. ? Secure packing & tracking provided. ? Accurate description & photos. Please return in the same condition as received. ??? US: Duty-free de minimis ended (China/HK from May 2, 2025; all countries from Aug 29, 2025). ? Rules vary by country. ? No undervalue / gift requests. ? Fair & transparent pricing. ? Found same item cheaper?? Feedback helps us & future buyers. ? Follow us for new arrivals.

]]> https://oirenomijapanese.com/2025/10/07/vintage-japanese-nomi-chisel-set-15pcs-carpenter-tools-mixed-brands-non-us-buyer/feed/ 0 https://oirenomijapanese.com/2025/09/18/vintage-higashimasamune-chisel-set-15-piece-oire-nomi-ebony-japanesechisels-woodworkingtools/ https://oirenomijapanese.com/2025/09/18/vintage-higashimasamune-chisel-set-15-piece-oire-nomi-ebony-japanesechisels-woodworkingtools/#comments Thu, 18 Sep 2025 07:42:32 +0000 https://oirenomijapanese.com/2025/09/18/vintage-higashimasamune-chisel-set-15-piece-oire-nomi-ebony-japanesechisels-woodworkingtools/ ]]> https://oirenomijapanese.com/2025/09/18/vintage-higashimasamune-chisel-set-15-piece-oire-nomi-ebony-japanesechisels-woodworkingtools/feed/ 0 https://oirenomijapanese.com/2025/08/31/vintage-japanese-ouchi-oire-nomi-chisel-15-mm-white-oak-handle-225mm-unused/ https://oirenomijapanese.com/2025/08/31/vintage-japanese-ouchi-oire-nomi-chisel-15-mm-white-oak-handle-225mm-unused/#comments Sun, 31 Aug 2025 18:52:46 +0000 https://oirenomijapanese.com/2025/08/31/vintage-japanese-ouchi-oire-nomi-chisel-15-mm-white-oak-handle-225mm-unused/









This is a beautiful Japanese-made chisel (Ouchi Oi Nomi) with a blade width of 15 mm. It was made by the Ouchi family, renowned blacksmiths from Banshu Miki. It dates back to the era of the second head of the family. Blade width: 15mm. Total length: Approximately 220-225mm (approximately 8.7-8.9 inches). Blade length: Approximately 60mm (estimated by visual inspection). Handle: White oak (hakukashi). Weight: Approximately 130-145g (4.6-5.1 ounces) These measurements are estimated based on similar chisels of the same class, and the actual values may vary slightly. This chisel, crafted using traditional forging techniques, is unused and retains its original rust-proof coating, with no visible rust or damage. It is the perfect tool for woodworking enthusiasts and collectors of Japanese hand tools. Feel free to message us if you have any specific questions – we’re happy to help! 100% authentic from Japan? Receipt available on request?? Personal info is protected?? No undervalue / gift requests?? Mon-Fri / 9:00-17:00 (JST)?? Replies within 24 hrs?? Help Us Grow – Your Feedback Matters! ? We’re a small, family-run store in Japan, supported by an amazing local team. ? Each item is carefully selected and packed with heart – we hope it brings you joy! We’re always growing – and would love for you to follow our journey! ? Don’t forget to leave feedback & check back for exciting new items!

]]> https://oirenomijapanese.com/2025/08/31/vintage-japanese-ouchi-oire-nomi-chisel-15-mm-white-oak-handle-225mm-unused/feed/ 0 https://oirenomijapanese.com/2025/08/29/vintage-japanese-ouchi-oire-nomi-chisel-18-mm-white-oak-handle-225mm-unused/ https://oirenomijapanese.com/2025/08/29/vintage-japanese-ouchi-oire-nomi-chisel-18-mm-white-oak-handle-225mm-unused/#comments Fri, 29 Aug 2025 18:40:46 +0000 https://oirenomijapanese.com/2025/08/29/vintage-japanese-ouchi-oire-nomi-chisel-18-mm-white-oak-handle-225mm-unused/









This is a beautiful Japanese-made chisel (Ouchi Oi Nomi) with a blade width of 18 mm. It was made by the Ouchi family, renowned blacksmiths from Banshu Miki. It dates back to the era of the second head of the family. Blade width: 18mm. Total length: Approximately 220-225mm (approximately 8.7-8.9 inches). Blade length: Approximately 60mm (estimated by visual inspection). Handle: White oak (hakukashi). Weight: Approximately 130-145g (4.6-5.1 ounces) These measurements are estimated based on similar chisels of the same class, and the actual values may vary slightly. This chisel, crafted using traditional forging techniques, is unused and retains its original rust-proof coating, with no visible rust or damage. It is the perfect tool for woodworking enthusiasts and collectors of Japanese hand tools. Feel free to message us if you have any specific questions – we’re happy to help! 100% authentic from Japan? Receipt available on request?? Personal info is protected?? No undervalue / gift requests?? Mon-Fri / 9:00-17:00 (JST)?? Replies within 24 hrs?? Help Us Grow – Your Feedback Matters! ? We’re a small, family-run store in Japan, supported by an amazing local team. ? Each item is carefully selected and packed with heart – we hope it brings you joy! We’re always growing – and would love for you to follow our journey! ? Don’t forget to leave feedback & check back for exciting new items!

]]> https://oirenomijapanese.com/2025/08/29/vintage-japanese-ouchi-oire-nomi-chisel-18-mm-white-oak-handle-225mm-unused/feed/ 0 https://oirenomijapanese.com/2025/08/29/vintage-japanese-ouchi-oire-nomi-chisel-3-mm-white-oak-handle-225mm-unused/ https://oirenomijapanese.com/2025/08/29/vintage-japanese-ouchi-oire-nomi-chisel-3-mm-white-oak-handle-225mm-unused/#comments Fri, 29 Aug 2025 06:39:56 +0000 https://oirenomijapanese.com/2025/08/29/vintage-japanese-ouchi-oire-nomi-chisel-3-mm-white-oak-handle-225mm-unused/







This is a beautiful Japanese-made chisel (Ouchi Oi Nomi) with a blade width of 3 mm. It was made by the Ouchi family, renowned blacksmiths from Banshu Miki. It dates back to the era of the second head of the family. Blade width: 3mm. Total length: Approximately 220-225mm (approximately 8.7-8.9 inches). Blade length: Approximately 60mm (estimated by visual inspection). Handle: White oak (hakukashi). Weight: Approximately 130-145g (4.6-5.1 ounces) These measurements are estimated based on similar chisels of the same class, and the actual values may vary slightly. This chisel, crafted using traditional forging techniques, is unused and retains its original rust-proof coating, with no visible rust or damage. It is the perfect tool for woodworking enthusiasts and collectors of Japanese hand tools. Feel free to message us if you have any specific questions – we’re happy to help! 100% authentic from Japan? Receipt available on request?? Personal info is protected?? No undervalue / gift requests?? Mon-Fri / 9:00-17:00 (JST)?? Replies within 24 hrs?? Help Us Grow – Your Feedback Matters! ? We’re a small, family-run store in Japan, supported by an amazing local team. ? Each item is carefully selected and packed with heart – we hope it brings you joy! We’re always growing – and would love for you to follow our journey! ? Don’t forget to leave feedback & check back for exciting new items!

]]> https://oirenomijapanese.com/2025/08/29/vintage-japanese-ouchi-oire-nomi-chisel-3-mm-white-oak-handle-225mm-unused/feed/ 0 https://oirenomijapanese.com/2025/08/25/vintage-japanese-ouchi-oire-nomi-chisel-12-mm-white-oak-handle-225mm-unused/ https://oirenomijapanese.com/2025/08/25/vintage-japanese-ouchi-oire-nomi-chisel-12-mm-white-oak-handle-225mm-unused/#comments Mon, 25 Aug 2025 18:32:45 +0000 https://oirenomijapanese.com/2025/08/25/vintage-japanese-ouchi-oire-nomi-chisel-12-mm-white-oak-handle-225mm-unused/









This is a beautiful Japanese-made chisel (Ouchi Oi Nomi) with a blade width of 12 mm. It was made by the Ouchi family, renowned blacksmiths from Banshu Miki. It dates back to the era of the second head of the family. Blade width: 12mm. Total length: Approximately 220-225mm (approximately 8.7-8.9 inches). Blade length: Approximately 60mm (estimated by visual inspection). Handle: White oak (hakukashi). Weight: Approximately 130-145g (4.6-5.1 ounces) These measurements are estimated based on similar chisels of the same class, and the actual values may vary slightly. This chisel, crafted using traditional forging techniques, is unused and retains its original rust-proof coating, with no visible rust or damage. It is the perfect tool for woodworking enthusiasts and collectors of Japanese hand tools. Feel free to message us if you have any specific questions – we’re happy to help! 100% authentic from Japan? Receipt available on request?? Personal info is protected?? No undervalue / gift requests?? Mon-Fri / 9:00-17:00 (JST)?? Replies within 24 hrs?? Help Us Grow – Your Feedback Matters! ? We’re a small, family-run store in Japan, supported by an amazing local team. ? Each item is carefully selected and packed with heart – we hope it brings you joy! We’re always growing – and would love for you to follow our journey! ? Don’t forget to leave feedback & check back for exciting new items!

]]> https://oirenomijapanese.com/2025/08/25/vintage-japanese-ouchi-oire-nomi-chisel-12-mm-white-oak-handle-225mm-unused/feed/ 0 https://oirenomijapanese.com/2025/08/24/vintage-japanese-ouchi-36-mm-oire-nomi-chisel-approx-220-mm-white-oak-handle/ https://oirenomijapanese.com/2025/08/24/vintage-japanese-ouchi-36-mm-oire-nomi-chisel-approx-220-mm-white-oak-handle/#comments Sun, 24 Aug 2025 18:30:44 +0000 https://oirenomijapanese.com/2025/08/24/vintage-japanese-ouchi-36-mm-oire-nomi-chisel-approx-220-mm-white-oak-handle/









This product is a high-quality Japanese chisel (Oirenomi) manufactured by the famous Ouchi Blacksmith in Miki City, Hyogo Prefecture. It features a blade width of 36 mm, making it a rare and valuable item for both collectors and professional woodworkers. Blade width: 36 mm (1 sun 2 bu). Total length: approx. 8.7 inches. Handle: Hard white oak wood, length approximately 90mm. Weight: Approximately 210g. This chisel is forged using the Ouchi family’s traditional techniques and high-quality steel, and assembled with meticulous craftsmanship. It is in excellent condition, possibly unused, with minimal signs of wear. It combines protective functionality with the appeal of a collector’s item. Feel free to message us if you have any specific questions – we’re happy to help! 100% authentic from Japan? Receipt available on request?? Personal info is protected?? No undervalue / gift requests?? Mon-Fri / 9:00-17:00 (JST)?? Replies within 24 hrs?? Help Us Grow – Your Feedback Matters! ? We’re a small, family-run store in Japan, supported by an amazing local team. ? Each item is carefully selected and packed with heart – we hope it brings you joy! We’re always growing – and would love for you to follow our journey! ? Don’t forget to leave feedback & check back for exciting new items!

]]> https://oirenomijapanese.com/2025/08/24/vintage-japanese-ouchi-36-mm-oire-nomi-chisel-approx-220-mm-white-oak-handle/feed/ 0 https://oirenomijapanese.com/2025/07/28/vintage-sentora-710-1085-oire-nomi-japanese-chisels-set-of-5-woodworking-tools-4/ https://oirenomijapanese.com/2025/07/28/vintage-sentora-710-1085-oire-nomi-japanese-chisels-set-of-5-woodworking-tools-4/#comments Mon, 28 Jul 2025 05:29:06 +0000 https://oirenomijapanese.com/2025/07/28/vintage-sentora-710-1085-oire-nomi-japanese-chisels-set-of-5-woodworking-tools-4/



















Please inspect the large photos provided carefully for condition.

]]> https://oirenomijapanese.com/2025/07/28/vintage-sentora-710-1085-oire-nomi-japanese-chisels-set-of-5-woodworking-tools-4/feed/ 0