Senkichi Japanese Chisel 3 Set Oire Nomi Hand Tool Carving 0.3 0.59 0.94 In

Senkichi Japanese Chisel 3 Set Oire Nomi Hand Tool Carving 0.3 0.59 0.94 In
Senkichi Japanese Chisel 3 Set Oire Nomi Hand Tool Carving 0.3 0.59 0.94 In
Senkichi Japanese Chisel 3 Set Oire Nomi Hand Tool Carving 0.3 0.59 0.94 In

Senkichi Japanese Chisel 3 Set Oire Nomi Hand Tool Carving 0.3 0.59 0.94 In
The item is a set of three Japanese chisels, Oire Nomi by Senkichi. Blade Width: 0.9cm (0.35 inches), 1. 5cm (0.59 inches), 2. 4cm (0.94 inches). Depending on your location. For other countries, around 7 to 14 days. International Buyers- Please Note. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. If you have any questions about an item, product description, specification, use, etc.
Senkichi Japanese Chisel 3 Set Oire Nomi Hand Tool Carving 0.3 0.59 0.94 In

Kakuri Japanese Chisel 3 Set Oire Nomi Hand Tool Carving In

Kakuri Japanese Chisel 3 Set Oire Nomi Hand Tool Carving In

Kakuri Japanese Chisel 3 Set Oire Nomi Hand Tool Carving In
The item is a set of three Japanese chisels, Oire Nomi by Kakuri. Blade Width: 1.8cm (0.7 inches), 2. 4cm (0.95 inches), 3. 0cm (1.2 inches). Depending on your location. For other countries, around 7 to 14 days. International Buyers- Please Note. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. If you have any questions about an item, product description, specification, use, etc.
Kakuri Japanese Chisel 3 Set Oire Nomi Hand Tool Carving In

Kakuri Japanese Chisel Oire Nomi Hand Tool Carving 1.7 Inches 42mm

Kakuri Japanese Chisel Oire Nomi Hand Tool Carving 1.7 Inches 42mm
Kakuri Japanese Chisel Oire Nomi Hand Tool Carving 1.7 Inches 42mm
Kakuri Japanese Chisel Oire Nomi Hand Tool Carving 1.7 Inches 42mm

Kakuri Japanese Chisel Oire Nomi Hand Tool Carving 1.7 Inches 42mm
The item is a Japanese chisel, Oire Nomi by Kakuri. Blade Width: 4.2cm (1.7 inches). Depending on your location. For other countries, around 7 to 14 days. International Buyers- Please Note. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. If you have any questions about an item, product description, specification, use, etc.
Kakuri Japanese Chisel Oire Nomi Hand Tool Carving 1.7 Inches 42mm

Funahiro Japanese Slick Push Chisels Tsuki Nomi Set of 3 Polished Dragon Carving

Funahiro Japanese Slick Push Chisels Tsuki Nomi Set of 3 Polished Dragon Carving
Funahiro Japanese Slick Push Chisels Tsuki Nomi Set of 3 Polished Dragon Carving
Funahiro Japanese Slick Push Chisels Tsuki Nomi Set of 3 Polished Dragon Carving
Funahiro Japanese Slick Push Chisels Tsuki Nomi Set of 3 Polished Dragon Carving
Funahiro Japanese Slick Push Chisels Tsuki Nomi Set of 3 Polished Dragon Carving
Funahiro Japanese Slick Push Chisels Tsuki Nomi Set of 3 Polished Dragon Carving

Funahiro Japanese Slick Push Chisels Tsuki Nomi Set of 3 Polished Dragon Carving
Condition : Unused but stored for a long time. The box is stained and damaged. Blacksmith : Funazu Yuji -??? Type : Tsuki Nomi/ Slick push chisels -??? Shinogi tsuki nomi – Dovetail push chisels -Blade width : Approx. 24mm -Full length : Approx. 630mm -Polished / migaki finish -3 hollows ura. Mentori tsuki nomi – Push chisels -Blade width : Approx. 42mm -Full length : Approx. Polished / migaki finish. 48mm -Full length : Approx. We are located in Japan. It’s our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items, please feel free to ask us. International Buyers – Please Note. These charges are the buyers responsibility. We do not mark merchandise values below value or mark items as gifts – US and International government regulations prohibit such behavior.
Funahiro Japanese Slick Push Chisels Tsuki Nomi Set of 3 Polished Dragon Carving

Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony

Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony
Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony
Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony
Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony
Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony
Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony
Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony
Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony
Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony
Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony

Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony
There are scratches, stains. The 24mm chisels have handles repaired with tape. Please maintain by yourself if necessary. Blacksmith : Funazu Yuji -??? Type : Bench chisels / Oire Nomi -?? 3,6,9,12,15,24,30,36,42mm. (0.12, 0.24, 0.35, 0.47, 0.59, 0.94, 1.18, 1.42, 1.65). Polished Finish Mulch Hollows Ura Tiger Carving. We are located in Japan. It’s our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items, please feel free to ask us. International Buyers – Please Note. These charges are the buyers responsibility. We do not mark merchandise values below value or mark items as gifts – US and International government regulations prohibit such behavior.
Funahiro Japanese Bench Chisels Oire Nomi Set of 9 Polished Tiger Carving Ebony

Japanese Chisel 5mm Vintage Furniture Nomi Carving Carpenter 43mm Oire TRK A8014

Japanese Chisel 5mm Vintage Furniture Nomi Carving Carpenter 43mm Oire TRK A8014
Japanese Chisel 5mm Vintage Furniture Nomi Carving Carpenter 43mm Oire TRK A8014
Japanese Chisel 5mm Vintage Furniture Nomi Carving Carpenter 43mm Oire TRK A8014
Japanese Chisel 5mm Vintage Furniture Nomi Carving Carpenter 43mm Oire TRK A8014
Japanese Chisel 5mm Vintage Furniture Nomi Carving Carpenter 43mm Oire TRK A8014
Japanese Chisel 5mm Vintage Furniture Nomi Carving Carpenter 43mm Oire TRK A8014
Japanese Chisel 5mm Vintage Furniture Nomi Carving Carpenter 43mm Oire TRK A8014

Japanese Chisel 5mm Vintage Furniture Nomi Carving Carpenter 43mm Oire TRK A8014
Japanese Chisel 5mm Vintage Furniture Nomi Carving Carpenter 43mm Oire TRK A8014. Condition of Item: Pre-Owned Rank: B. Blade width: 5mm, 9mm, 12mm, 14mm, 15mm, 18mm, 23mm, 24mm, 42mm, 43mm. Needs sharpening and adjusting. It is used but used only a few times and there are no scratches and dirt. No noticeable scratches or stains. There are some scratches and dirt that you do not know unless you look closely. There are some scratches and dirt. There are some scratches and dirt that are known to be used. There are scratches and dirt. There is a big scratch and dirt of the level understood at a glance. Overall condition is bad. There is a defect at the level that big troubles and dirt and trouble in use. Please pay within 3 days. International Buyers – Special Attention. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Listing and template services provided by inkFrog. This item is in the category “Home & Garden\Tools & Workshop Equipment\Hand Tools\Chisels”. The seller is “diy_carpenter_japan” and is located in this country: JP. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Can’t read
  • Type: Oire Nomi
  • Number of Pieces: 12
  • Handle Material: Wood
  • Blade Material: Steel
  • Blade Width: 5, 9, 12, 14, 15, 18, 23, 24, 42, 43 mm
  • Model: None
  • Manufacturer Warranty: None
  • Color: Black
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Bundle Description: None
  • Item Width: None
  • Item Length: None
  • Item Height: None
  • Item Diameter: None
  • Item Weight: None
  • None: None

Japanese Chisel 5mm Vintage Furniture Nomi Carving Carpenter 43mm Oire TRK A8014

Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181

Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181
Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181
Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181
Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181
Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181
Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181
Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181
Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181
Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181
Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181

Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181
Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181. Condition of Item: Pre-Owned Rank: JUNK. Blade width: 6, 9, 12, 15, 18, 24, 30, 36, 42 mm. Needs sharpening and adjusting. It is used but used only a few times and there are no scratches and dirt. No noticeable scratches or stains. There are some scratches and dirt that you do not know unless you look closely. There are some scratches and dirt. There are some scratches and dirt that are known to be used. There are scratches and dirt. There is a big scratch and dirt of the level understood at a glance. Overall condition is bad. There is a defect at the level that big troubles and dirt and trouble in use. Please pay within 3 days. International Buyers – Special Attention. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Listing and template services provided by inkFrog. This item is in the category “Home & Garden\Tools & Workshop Equipment\Hand Tools\Chisels”. The seller is “diy_carpenter_japan” and is located in this country: JP. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Sukekuni
  • Type: Oire Nomi
  • Number of Pieces: 9
  • Handle Material: Wood
  • Blade Material: Steel
  • Blade Width: 6, 9, 12, 15, 18, 24, 30, 36, 42 mm
  • Model: None
  • Manufacturer Warranty: None
  • Color: Black
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Bundle Description: None
  • Item Width: None
  • Item Length: None
  • Item Height: None
  • Item Diameter: None
  • Item Weight: None
  • None: None

Japanese Nomi Sukekuni Chisel 6mm Carpenter Furniture Carving 42mm Vintage A8181

Japanese Chisel Hirofumi Nomi Handmade Oire Sharpness Carpenter Carving FS M6111

Japanese Chisel Hirofumi Nomi Handmade Oire Sharpness Carpenter Carving FS M6111
Japanese Chisel Hirofumi Nomi Handmade Oire Sharpness Carpenter Carving FS M6111
Japanese Chisel Hirofumi Nomi Handmade Oire Sharpness Carpenter Carving FS M6111
Japanese Chisel Hirofumi Nomi Handmade Oire Sharpness Carpenter Carving FS M6111
Japanese Chisel Hirofumi Nomi Handmade Oire Sharpness Carpenter Carving FS M6111
Japanese Chisel Hirofumi Nomi Handmade Oire Sharpness Carpenter Carving FS M6111

Japanese Chisel Hirofumi Nomi Handmade Oire Sharpness Carpenter Carving FS M6111
Japanese Chisel Hirofumi Nomi Handmade Oire Sharpness Carpenter Carving FS M6111. Condition of Item: Pre-Owned Rank: B. It is used but used only a few times and there are no scratches and dirt. No noticeable scratches or stains. There are some scratches and dirt that you do not know unless you look closely. There are some scratches and dirt. There are some scratches and dirt that are known to be used. There are scratches and dirt. There is a big scratch and dirt of the level understood at a glance. Overall condition is bad. There is a defect at the level that big troubles and dirt and trouble in use. Please pay within 3 days. International Buyers – Special Attention. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Listing and template services provided by inkFrog. This item is in the category “Home & Garden\Tools & Workshop Equipment\Hand Tools\Chisels”. The seller is “diy_carpenter_japan” and is located in this country: JP. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Hirofumi
  • Type: Oire Nomi
  • Handle Material: Hardwood
  • Number of Pieces: 7
  • Blade Material: High Carbon Steel
  • Blade Width: None
  • Model: None
  • Manufacturer Warranty: None
  • Color: Black
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Bundle Description: None
  • Item Width: None
  • Item Length: None
  • Item Height: None
  • Item Diameter: None
  • Item Weight: None
  • None: None

Japanese Chisel Hirofumi Nomi Handmade Oire Sharpness Carpenter Carving FS M6111

Japanese Nomi Mizuki Furniture Vintage Chisel 6mm Carpenter Carving Oire (A8154)

Japanese Nomi Mizuki Furniture Vintage Chisel 6mm Carpenter Carving Oire (A8154)
Japanese Nomi Mizuki Furniture Vintage Chisel 6mm Carpenter Carving Oire (A8154)
Japanese Nomi Mizuki Furniture Vintage Chisel 6mm Carpenter Carving Oire (A8154)
Japanese Nomi Mizuki Furniture Vintage Chisel 6mm Carpenter Carving Oire (A8154)
Japanese Nomi Mizuki Furniture Vintage Chisel 6mm Carpenter Carving Oire (A8154)
Japanese Nomi Mizuki Furniture Vintage Chisel 6mm Carpenter Carving Oire (A8154)

Japanese Nomi Mizuki Furniture Vintage Chisel 6mm Carpenter Carving Oire (A8154)
Japanese Nomi Mizuki Furniture Vintage Chisel 6mm Carpenter Carving Oire (A8154). Condition of Item: Pre-Owned Rank: B. Blade width: 6 mm. Full length: 19 cm. It is used but used only a few times and there are no scratches and dirt. No noticeable scratches or stains. There are some scratches and dirt that you do not know unless you look closely. There are some scratches and dirt. There are some scratches and dirt that are known to be used. There are scratches and dirt. There is a big scratch and dirt of the level understood at a glance. Overall condition is bad. There is a defect at the level that big troubles and dirt and trouble in use. Please pay within 3 days. International Buyers – Special Attention. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Listing and template services provided by inkFrog. This item is in the category “Home & Garden\Tools & Workshop Equipment\Hand Tools\Chisels”. The seller is “diy_carpenter_japan” and is located in this country: JP. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Mizuki
  • Type: Oire Nomi
  • Number of Pieces: 1
  • Handle Material: Hardwood
  • Blade Material: Steel
  • Blade Width: 6 mm
  • Model: None
  • Manufacturer Warranty: None
  • Color: Black
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Bundle Description: None
  • Item Width: None
  • Item Length: 19 cm
  • Item Height: None
  • Item Diameter: None
  • Item Weight: None
  • None: None

Japanese Nomi Mizuki Furniture Vintage Chisel 6mm Carpenter Carving Oire (A8154)

Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077

Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077
Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077
Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077
Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077
Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077
Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077
Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077
Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077
Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077

Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077
Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077. Blade width: 3, 3, 18, 21, 21, 24, 24, 24, 30, 30, 30 mm. Full length: 221 – 310 mm. Please pay within 3 days. International Buyers – Special Attention. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Listing and template services provided by inkFrog. This item is in the category “Home & Garden\Tools & Workshop Equipment\Hand Tools\Chisels”. The seller is “diy_carpenter_japan” and is located in this country: JP. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Akihisa
  • Type: Oire Nomi
  • Handle Material: Hardwood
  • Blade Material: High Carbon Steel
  • Number of Pieces: 10
  • Blade Width: 3, 18, 21, 24, 30 mm
  • Model: None
  • Manufacturer Warranty: None
  • Color: Black
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Bundle Description: None
  • Item Width: None
  • Item Length: None
  • Item Height: None
  • Item Diameter: None
  • Item Weight: None
  • None: None

Japanese Nomi Akihisa 3mm Carving Professional Chisel 30mm Carpenter Track J7077